clutch or what

[coop379]

ive got a 06 kingquad looking to put a clutch kit in it as well as a perfomance chip wondering witch one u folks would suggest thanx

[QUADNUT]

Clutch kit- your own preference. I have only a Dalton secondary spring in my king and i took the wieghts out of the rollers and drilled them out to lighten them to create my own kit. fairly easy to do, hardest thing is the secondary spring if u dont have the proper tools. I still get 20+mpg and can still pull 55+mph with my big outlaws and windshield.

There are a few performance chips out that ADD fuel to your quad. VDI copperhead is going to be released very shortly that will add fuel as well as adjust your timing to let your quad run cooler and make the power where it is currently lacking. A VDI kit is $500 CDN, and a Dalton and EPI kit are $300. Or if u get lucky u can purchase just a secondary spring for $50-75 and just drill out your weights. I installed a SPEEDWERX kit on the boss's prowler and it comes with rollers and weights as well as a beefy secondary spring. it sure pulls hard with this kit. 2 guys in the 1200lb quad in the mud and still in Hi range. But this kit is $400. hope this helps

[wild man]

drill rollers like he said but i didn t buy a spring what you do is drill a hole 1/4 in. to the left of where your secondary sping hooks and that will equal a stiffer sping and no money ,,more low end and still do 64 mph and would have alot more but i govern out du to the lighter rollers