RZR S Lift kit Finally coming from RDC

[rubberdown]

I finally got an RZR-S machine into the shop to build a lift kit for it. I have the first one installed and checked everything out and like what I have come up with. Its a VERY solid kit or it wouldnt have the RDC Name attached to it. Everything is a 1/4" thick and it is an upper shock mount bracket. No holes need to be drilled anywhere, and the installation is VERY simple, no need to remove anything off the machine, not the tires, not the rear valance, just the upper shock bolts.

Check it out, and let me know if you have a non lifted RZR-S and need a kit, we will likely start it off with an introductory price so we can get a bunch out there and get some feedback on everything.

take notice of the parts, everything is 1/4" thick steel,we dont mess around here

[Dorgie]

solid looking stuff! ill have to bring you a maverick whenever i decide to buy one haha

[rubberdown]

It'd be a long drive but I would welcome you into the shop if you brought me one of those to play with

[fuelinjected]

Hey, any chance you have pictures with it installed on the RZR S? With my offset wheels I lost a bit of ground clearance.

I can crank up my shocks but will probably lose my ride quality. Wondering if maybe this is the better route.

[rubberdown]

Didnt have any decent opportunities to take after pictures of my test machine, sorry.

[DARCY DEE'S]

I have a 2010 RZR-S I would be in for a kit if you say its a lift kit ,how much will it lift may unit, the last so called lift kit that one of my customers brought in for me to install actually lowered the unit buy 1/2" thanks .................do you have a price on this kit yet.

[rubberdown]

Originally Posted by DARCY DEE'S

I have a 2010 RZR-S I would be in for a kit if you say its a lift kit ,how much will it lift may unit, the last so called lift kit that one of my customers brought in for me to install actually lowered the unit buy 1/2" thanks .................do you have a price on this kit yet.

I measured about 2" to 2-1/4" in the front, and about 1-1/2" in the rear. The rear couldnt go any higher or I had binding in the rear axles. Retail will be around the $200 price range, still working on getting my manufacturing costs figured out.

What brand was the lift kit you had before?

[DARCY DEE'S]

I would like to do a front lift on my own S just to make it sit level. it should make it handle better, and look better, you can pm with the price and where I can pick it up.